1、清洗:拉擠模具內外表面定期清洗,以利于防止積存物,可用酒精或肥皂水清洗,清洗后應用毛巾把表面擦拭干凈。
Cleaning: clean the inner and outer surfaces of the extrusion die regularly to prevent accumulation of material, alcohol or soap can be used for cleaning, and a towel should be used to wipe the surface dry after cleaning.
2、潤滑油:拉擠模具應定期涂層或涂一層抗磨潤滑油,潤滑油應使用無腐蝕成分的高質量機械潤滑油。
Lubricating oil: The extrusion die shall be coated or coated with anti-wear lubricating oil regularly, and the lubricating oil shall be of high quality mechanical lubricating oil with no corrosive components.
3、檢查:拉擠模具定期檢查,檢查內容包括模具外圈,壓力部位,拉擠部位,支撐部位是否有明顯破損,如有明顯破損,應及時修補或更換。
Inspection: The extrusion die shall be inspected regularly, including the external circle, pressure parts, extrusion parts and support parts for obvious damage, if any obvious damage, shall be repaired or replaced in time.
4、磨面:拉擠模具定期磨光表面,磨面應使用無砂磨料,不使用金剛砂和金剛砂附著物,應防止模具表面破損。
Surface grinding: The surface of the extrusion die shall be polished regularly, and the grinding material shall be free of abrasives, and no diamond sand or diamond sand adhesives shall be used, and the surface of the die shall be prevented from damaging.
5、防銹:拉擠模具應定期涂抹防銹油,以防模具表面生銹。
Rust prevention: The extrusion die shall be coated with rust-proof oil regularly to prevent rust on the surface of the die.